FAQ's
On our faq page, you can find questions about flooring underlayment and floor heating systems. Get helpful information to assist with your purchase decisions and address any concerns you may have.
Filter
QuietWalk Plus can be used over any substrate approved by your flooring manufacturer, and is suitable for use with laminate and floating hardwood flooring.
If you are looking for a test report please send an email to [email protected] and specify the product and type of report you are needing. We would be more than happy to email you a copy of any testing data that we have.
AbsorbaSound can be used in place of a cement board or uncoupling mat.
AbsorbaSound is a sound barrier that will help to reduce the transfer of noise between levels, in either direction.
AbsorbaSound is designed to be installed under your floor covering. We cannot attest to the effectiveness when used under an area rug.
AbsorbaSound is suitable for use under ceramic tile. We would feel confident in the use of our product in the application described, however we would recommend getting approval from the manufacturer of the uncoupling membrane as well.
AbsorbaSound comes in various thicknesses. The 2mm thick product, 200 square foot roll will weigh approximately 75lbs. Other thicknesses are listed on our spec sheet which can be viewed on the AbsorbaSound product page.
AbsorbaSound is not currently approved for use under turf products, as we have no testing data to determine suitability.
QuietWalk Plus is not approved for use with peel and stick vinyl flooring.
In theory, QuietWalk Plus would help to reduce the noise transfer in this application. However, we have not tested this particular application and cannot attest to the suitability. QuietWalk Plus is approved for use installed under laminate and wood flooring.
QuietWalk Plus has only been tested and approved for use installed under laminate and wood flooring. In theory this would help to reduce noise transfer, but we cannot say for certain.
The difference between QuietWalk and QuietWalk Plus is the attached film. QuietWalk Plus has a specialized film designed to accept nails and adhesives so it works with floating, nail-down, and glue-down installation methods of laminate and wood floors. QuietWalk is approved for floating wood and laminate only.