FAQ's
On our faq page, you can find questions about flooring underlayment and floor heating systems. Get helpful information to assist with your purchase decisions and address any concerns you may have.
Filter
When installing SoundBuffer underneath a floating floor, please use a high quality duct tape at the seams. If you are using the double-glue or nail-down installation method, that is not required.
SoundBuffer will help reduce minor subfloor imperfections, however it is not a substitute for proper subfloor preparation. Please ensure your subfloor is within tolerances of your flooring manufacturer prior to installing SoundBuffer.
If you are looking for a test report please send an email to [email protected] and specify the product and type of report you are needing. We would be more than happy to email you a copy of any testing data that we have.
QuietWalk Versa is approved for use with luxury vinyl flooring.
QuietWalk Versa does have an attached lip and tape system for easy sealing of side seams. You may need tape when joining ends together.
Our QuietWalk Versa unrolls opposite to the way it should be installed. This helps ensure when installed with the vapor barrier facing up, the product will lay flat.
It is not recommended to use any underlayment beneath peel and stick tile.
SoundBuffer has an IIC rating of 68. To view specific test reports on all of our products, please visit our Knowledge Center and click on Underlayment Sound Test Tool.
SoundBuffer is suitable for use with most flooring adhesives. We defer to your flooring manufacturer’s guidance on selecting a specific product.
SoundBuffer does not prevent or protect from moisture in your concrete slab. We recommend selecting an underlayment from our QuietWalk family of underlayments. The QuietWalk products have a recycled fiber construction that wicks harmful moisture from the slab and allows it to safely evaporate, while protecting your new flooring with the bonded vapor barrier.
No, SoundBuffer is not approved for use with ceramic tile. We recommend Insulayment for a ceramic tile application.
SoundBuffer is approved for use with radiant heat systems. We recommend pairing with our QuietWarmth Radiant Heat Systems.