Quietwarmth’s Improvements on Traditional Floor Heating

QuietWarmth is the future of flooring heating. Here are the benefits of QuietWarmth’s advanced ink technology.

View QuietWarmth Radiant Heating Systems: https://mpglobalproducts.com/heated-flooring-systems/

Check out our Instagram: https://www.instagram.com/quietwalkpad/

Transcript: Thanks for joining us today to learn all about the QuietWarmth Radiant Film Heating systems for tile and floating floors along with our Joist retrofit option for under-existing floors.
QuietWarmth floor heating systems are different from other electric in-floor heating systems because QuietWarmth uses a conductive ink technology instead of a heating cable. This unique technology provides a more even distribution of heat to the floors, with no cold spots and no danger to floor covering materials in concerns of overheating. The conductive ink in each stripe is designed to NOT exceed 85 degrees F, so at the most, the system will tap itself out at 85 degrees.

Generally speaking, most people from what we have found, live within their own room temperatures and comfort levels – which is somewhere between 72-75 degrees. The QuietWarmth thermostats will allow controlling the system for personal comfort.

In traditional electric radiant heat systems that weave a heating cable, the use of self-levelers are needed to bury the cable system so that the subfloor is flat for the floor covering installation.
The QuietWarmth systems are thinner than a credit card and will not raise the floor height. Additionally, the QuietWarmth system does not require any additional self-levelers which saves both time and money. It installs right beneath your flooring surface. Just unroll and go…. quite literally using the QuietWarmth system can save days on installations by not needing to wait for extra steps in between, like drying times and curing of setting materials for the heating system.
Oh, but what happens if your guest already installed their floor or has a floor they don’t want replaced?! No problem!! QuietWarmth has an under-subfloor option available that can retrofit between joist spacing beneath an available access to a subfloor like in a basement or crawl space. This thin technology is made for warm feet, fast installation, and the weekend warrior!

Each one of these black stripes in the heating mats is its own heater…so even if one of these bars becomes damaged (perhaps unknown during installation for example) it doesn’t stop the rest of the mat from working. Only the bar that is damaged will no longer work. Because each stripe is independent, each mat can be cut to fit to length ONLY – without destroying the function of the mat. This allows you to customize mats to your room’s size.

And finally, while you can cover the entire room with floor heat with QuietWarmth mats, it isn’t always needed. Since QuietWarmth is so thin and doesn’t raise the subfloor height, you can strategically place the mats where you spend the most time to enjoy specific comfort. This will save time and money by not having to cover the entire room with floor heat. We call this “spot heating.”

An example is a bathroom, place in front of the vanity where it’s common to spend a large part of our mornings getting ready. With a second mat, place in front of the shower or tub so that your feet are warm upon entering/exiting the bath. So instead of covering the entire bathroom, cover where the heat will be used the most. Being able to place the heat where you would enjoy the comfort helps the guest to customize their own home experience.

*For Float and Tile mats using 120V, one thermostat controls up to 120 square feet of mats. When using 240V, one thermostat can control up to 240 square feet. *