If you are looking for a test report please send an email to [email protected] and specify the product and type of report you are needing. We would be more than happy to email you a copy of any testing data that we have.
To clean ParkPad, we recommend you wash off dirt and grime with a mild dish detergent and water. We do not recommend you attempt to wash large amounts of motor oil out of your ParkPad, as motor oil is an environmental hazard. Please replace ParkPad if it becomes saturated with any type of chemical that can contaminate the soil or ground water.
Yes, our ParkPad product is wrapped in plastic for shipping.
The ParkPad backing will not “melt” in the heat of your garage. It does not stick to surfaces, even when warm. However, please ensure your paint is fully cured prior to placing ParkPad over it.
When installing Insulayment with porcelain tile, we recommend using a latex modified portland based thinset that conforms to ANSI A118.4.
Insulayment will provide thermal insulation, making your radiant heating system more effective.
Insulayment is not approved for use with sheet vinyl or linoleum flooring.
Insulayment is approved for flooring applications only. We do not have testing to establish safety or effectiveness in wall applications.
QuietWarmth Tile and Insulayment with tile floor covering are only approved in conditions where the subfloor meets the standards established by the Tile Council of North America. If your subfloor meets these standards, the proper method to install these products would be to spread a layer of thinset over the top of the Insulayment, then lay the QuietWarmth tile mat(s), then install your ceramic tile.
We recommend installing Insulayment with a latex modified thinset. The thinset listed would be one of many options suitable to use.
Insulayment has not been tested with “puzzle” or “gym” type flooring options. We cannot attest to suitability.