If you are looking for a test report please send an email to [email protected] and specify the product and type of report you are needing. We would be more than happy to email you a copy of any testing data that we have.
To clean ParkPad, we recommend you wash off dirt and grime with a mild dish detergent and water. We do not recommend you attempt to wash large amounts of motor oil out of your ParkPad, as motor oil is an environmental hazard. Please replace ParkPad if it becomes saturated with any type of chemical that can contaminate the soil or ground water.
Yes, our ParkPad product is wrapped in plastic for shipping.
The ParkPad backing will not “melt” in the heat of your garage. It does not stick to surfaces, even when warm. However, please ensure your paint is fully cured prior to placing ParkPad over it.
The difference between QuietWalk and QuietWalk Plus is the attached film. QuietWalk Plus has a specialized film designed to accept nails and adhesives so it works with floating, nail-down, and glue-down installation methods of laminate and wood floors. QuietWalk is approved for floating wood and laminate only.
QuietWalk is not approved for use with luxury vinyl products. We recommend QuietWalk Luxury Vinyl for this application.
That is not an intended application, but there should be no issue to use QuietWalk under an area rug.
QuietWalk has only been tested and approved for use over a substrate, below a floating laminate or wood floor. We have not tested it for use between layers of plywood and cannot speak to the suitability.
QuietWalk is approved for a concrete subfloor under laminate flooring and has an attached vapor barrier. You shouldn’t need an additional vapor barrier unless the moisture vapor emissions of your slab exceed 5lbs/1000sf/24hrs.
All of the underlayments in our QuietWalk family of products would be excellent in this application. They are all approved for use over concrete and under laminate flooring.
QuietWalk is approved for floating applications only. QuietWalk Plus can be installed in a double glued application with engineered wood.
QuietWalk can be used below a floating engineered hardwood floor. If you are planning on stapling your engineered wood floor, you would need to use QuietWalk Plus.